Types of Fiber Optic Cable Stripper, Get the Best Price Now

Melontel, as a professional communication equipment supplier, can provide you with a variety of fiber optic cable stripper, including many different kinds of drop cable stripper and slitter for fiber optic cable, copper cable, network cable, telephone line and coaxial cable.

Fiber optic Cable Stripper can be described as a versatile device that assists in the installation of quick assembly connectors for FTTH and permits the rapid stripping of skinned wires as well as coating layer.
From the general appearance, drop cable stripper appears tiny and elegant while the normal pliers look is quite distinct, it is like a tool that has been used by professionals.

The body of the drop cable with carbon steel forging. It has high quality, toughness, and then complemented by black spray paint treatment to prevent rust, robust and durable, with no corrosion. Handle is covered with PVC protection sleeve. Hand grip is comfortable, non-slip when in use, and does not fall off.

Drop cable stripper with two straight line horizontal blades with a cross-shaped blade. It cuts fiber optic cable quickly remove the reinforcing wire. It is able to effectively safeguard the cable doesn’t harm the cable’s core.

It is important to note that this equipment is an adjustable cable sizer. The with a 2-5 cm range that is clearly apparent, and it is possible to select to cut the cable’s core lengthand tailor it to allow the stripping line to be opened.

Fiber optic cables made of leather are flexible, comfortable and simple to splice. It can be used to hot and cold splices two ways, making it suitable for building and other that require wiring inside, however the security is minimal with a low mechanical strength typically used to connect fiber that connects to the home.

Read on: Optical Cable Strippers Punch Down Tool

1. Materials： Tungsten Steel S50C, HRC 48+-2

2. Ideal for flat drop wire 3.0*2.0mm

3. Cable hold The cable hold is flat.

4. Color: Black

5. A comfortable handle with a simple operation

6. Net weight: 150g

fiber optic cable stripper to 3.1*2.0mm Drop cables FTTH made of Steel wire and FRP strength. It is constructed of Tungsten steel and black plating. fiber optic cable stripper will make cable splicing easier which is more efficient and simple to use. Application FTTH crop cable , fiber cladding diameter 125 mm.

Temperature is -20 degrees C + 50 degC.

Factory preset stripper, there is no need to adjust this stripper once more to prevent damage to the fibers cutting blade precision positioning tempering and quenching treatment anti-rust primer.

The factory has pre-set the parameters No adjustments are required

All stripping surfaces are made with precision tolerances, ensuring smooth, clear strips
Comfort-grip, ergonomic handles.

A wire stripper that is versatile and of solid construction, capable of cutting and stripping flexible between 0.2 to 0.4mm with no adjustment.

Blade tension can be adjusted to accommodate external sheaths made of 3 cables.

Also included is the cable cutter.

Name: KMS-K fiber optic cable stripper

The brand name is Melontel or OEM
Mode No: MT-S9001

Weight of Weight: 189g (contain in the box with red)

Dimension: 190x70x35mm

Package: 60 set/carton.

CTN: 40x38x27cm

GW/NW: 13.5/11.5KG

The drop cable stripper for the safe longitudinal division in plastic sheaths having different thickness. The fiber optic cable stripper can be used either at the start or middle in the length of cable. Additional pieces to attach for cutting optic cables and cables with a small diameter are available.

* Impact-resistant plastic material
* Simple and safe handling
* There is no danger of injury
* Adjustable slitting depth

Double bladed knife constructed from special steel, which has been tempered.

1. Cable sheath slitter

2. Attachable piece with grey color for cables with a maximum length of 25mm

3. Attachable piece with a yellow color used for connecting fiber optic cables

4. “L” shaped hexagon key

5. Operating instructions

6. Plastic case

Learn more about Connector Crimping Tool，The Ultimate Guide

This outdoor 1 pair distribution box contains a plastic part, an 1 pair STB module with protection, and a lock. One side connects to the client’s main site, while the other side connects to the main electrical network from which it draws its power.

1.clauss model no.cfs-2.

2.Fiber optic stripper for stripping 125 micron fiber with 250 micron buffer coating.

3.fiber optic cable stripper Weight: 126g

4.Handle material is Plastic

5.The miller cable stripper size is 165mm.

6.The miller fiber optic calbe stripper have 2 port holes count.

Try for free Fiber Optic Drop Cables

1.Package Weight: 1.026kg

2.Length: 6.25″, 148mm

3.Material Material: Anodized Steel Core Rubber Grips

4.Color The color is Yellow.

5.Coating Stripper: 250um

1.The blade is made from high carbon steel, refined with HRC 60 deg> 62 deg. blade is HV1200 high microhardness.

2.Serrated blade design to prevent sliding when shearing kevlar

3.The handles are made from elastic plastic that is flexible, comfortable to grip and operate

4.Specially made to cut the outer kevlar cables of optical fiber. They have a long life span.

1.Ergonomic Handle

2.Closing Latch

3.1.6mm from 3.0mm Jacket Stripper

4.600um up to 900um buffer Stripper as well as 250um Coating Stripper

1. The length is 6.25″ (148mm)

2.Width 3.5 in. 2.25″ closed

3.Material Material: Anodized Steel Core Rubber Grips

Read more about Fiber Optic Connector

N.W. Weight:95g

Size of the product Size: 12x71x30cm

Application: Multi Functional

Material: Carbon Steel

Function:Multifuction

Blade and ABS material

Color: yellow

Packing: blister card

• Coal Compression Tool Kit: Crimps compression connectors to coaxial cables Fixed plunger allows for quickand easy installation and removal of connector and cable
• The Coax Cable Stripping Tool Made of high-impact materials The one side is suited for RG-59/6, while the other is for RG-7/11; adjustable two blades designed for the RG-59 and RG6 Triset-113 cables as well as a tool for stripping telephone and computer cables as well as a knife for cutting cables.
• Premium F Connectors are designed to offer a professional, safe, waterproof connection to RG6 coaxial cables. Made of brass, featuring dark nickel plating suitable for indoor use
• Coax Cable Install Kit Ideal for multiple coax-related applications, like Satellite TV, CATV, Home Theater and Security

• Compact tool that has a lock for the handle and a steel body with black-oxide coating for the resistance to corrosion and long-lasting use
• Compression Tool Cable Crimper
• The tool compresses female F connectors (RG58, RG59 and RG6) by using the plunger
• Compact compression crimper, which is an advanced DIY tool that can be used for speedy reliable and secure F-connector installations that allows for quick insertion and removal of connector and cable.
• Universal Coaxial Cable Stripper Cutter
• UTP/FTP cables and flat telephone cables
• Removes the outer jacket and central
• A movable stripper that can be adjusted to accommodate coaxial cables.
• There are two blades that strip the outer and inner insulation of telephone cables . cables are made in one process
• High Coax Crimper of High Quality
• Constructed with solid and durable materials for stronger, more durable and long-lasting performance.
• Connectors with an open design allow for simple to be inserted and easy removal, and also a long-lasting connection, so that the connector will never loosen.

Location Source: Zhejiang, China

Mark Name MELONTEL

Model Number: MT-8928

Name of the product: Cable Stripper

Software: Cable Stripping

Blade material Material for blades: Metal

Handle material: Plastic

Size: 210*110*32mm

N.W. : 310g

Color: Yellow&Black

Packaging: 1 PCS /blister card

This multi-function automatic wire stripper can adjust the screw’s movement without damaging wire. Additionally, the plastic sliding block is able to adjust the length of stripping.

If there is there is no need to use it, simply push it in the opposite direction.

The cutter is able to cut off the aluminum and copper wire. Then the stripping jaws are capable of strip the wire according to the specifications AWG10-24 /0.2-6.0mm*2.

The method of processing the material is Black Oxide, Satin Finish, Heat Treat and High Quality Steel.

1.Thanks to the great gripping position, the lightweight and compact structure, and handle design that creates the an ideal crimping effect.

2. Wire Crimper Tool Professional for professional use with self-adjusting ratchet mechanism, as well as wire stripper, which makes for easy use.

3. This is applicable to the majority of the connectors and crimps that aren’t insulated.

4. With four interchangeable terminals and various the crimping ranges.

5. Multi-functional wire stripper designed for connectors with a range of 24-to-10AWG (0.2-6.0mm2).

6. Created in accordance with human factors engineering, it will reduce energy consumption by 50% when pressing.

Read my article on All Dielectric Self Supporting (ADSS) Cables, The 2022 Complete Guide

1. Where Of Origin Zhejiang, China

2. The Brand Name is MELONTEL

3. Model Number: MT-8915

4. Name of the product: Cable Stripper

5. Application for: CATV

6. Suitable: 4.5~25mm cable

7. Weight: 192g

8. Material for blades: Metal

9. Handle material: Plastic

10. Length:165mm

11. Packing: 1 PCS/blister card

1. It allows insulation to be removed from the longer section as well as in the middle of the cable.

2. Adjustable cutting depth

3. Allows cutting in a spiral, and also on the its circumference

4. Equipped with a rotary blade

5. It is equipped with a knob to adjust the bow limiter

1 .Adjust the size in accordance to the diameter of the cable

2. Adjust the length of blade extension depending on the cable’s thickness.

3.360 degree rotation peeling.

4 .The blade is linked to the rod’s structure. After pressing the rod, the blade can be rotated from horizontal in parallel position to its axis in order to be pulled in a longitudinal direction to facilitate quick cable stripping

Where Of Origin Zhejiang, China

Mark Name MELONTEL

Model Number: MT-8911

Name of the product: Cable Stripper

Application:For Copper Cable

Blade material Material for blades: Metal

Handle material: Plastic

Size: 197*98*23mm

N.W. : 61g

Color Gray

Useful for: O3.2-O 9.0mm cable

Packing: 1 PCS/blister card

Round wire stripping (UTP&STP) as well as flat wire as well as multiple transmission lines 3.2mm-9.0mm.

The blade’s thickness can be adjusted in a variety of ways that is ideal for the majority of round cables.

The Rotary blade regulator is the most sophisticated stripping tool regulator

The front-end slot is different in specifications. The slot can be positioned in accordance with the size of the cable.

Adjust the table on the cutter’s rotary head to regulate cut depth in order to ensure that there is no damaging the cable.

1.Flat Wire Stripper by inserting the cable between the blades of the stripper. The handles are squeezed, the cable should be kept perpendicular, and then release the tool. The following cables are available:

Telephone wire strung in strands 2P 4P, 6P 8P 10P.

Intercom/Alarm wire/2-Cond. Speaker wire 18-22AWG, and SPT-1 Electric wire

2.Round 2.Round Stripper 3.Round Cable Stripper, by turning it three times in counterclockwise direction, and then opening the jaw, and then remove an outer layer. It is available for the following cables:

Round cable: Strong insulation, 12-14-16 AWG cable the electric wire.
Assorted solid modular wire: UTP, PT, Data Communication wire and Network cable.
Multi-Conductor cable Conductors: Insulation O.D. 3.2mm up to 9.5mm (1/8″-3/8″)
Automative/Heavy-duty wire max.8 AWG.

3.Adjusting Bolt control to suit different sizes of cable.

1.Applied to the sheath of lan cable and conductor stripping and cutting

2.Adjustable screw for precise stripping

3.Hardened and tempered carbon steel polished , sharp blade

4.Precise tolerances to ensure smooth and clean strips. cut

5.Wide cable OD extended from 22AWG through 9.5mm(3/8″)

6.Stripping and cutting for Round Cable/Stranded Wire/Irregular Shape Cable

Learn more about FTTH Cables and Their Role in Internet Connectivity

Name: Cable Stripper

Material: Aluminium alloy

Color Silver

Type: Longitudinal type

Application: Stripping fiber optic cable

Packaging: 1pcs per box

Length : 205 millimeters

N.W:550g

It is suitable for cables O10-O25mm

Certification: ISO9001

The Longitudinal Cable Sheath Slitter is an instrument that is that is designed to strip optic cables of sheath, using the minimum effort. Utilizing Wire Clamp together it allows you to remove sheaths from optical cables more quickly and easily than handsaws and knives.

It’s particularly helpful when stripping cables to facilitate mid-span branching. If you replace the blades that are fixed in the central point of Stripper it is possible to use this tool for a long time.

1. Adjust the nuts on the rotary heads and adjust the head’s depth.

2. Insert the cable into the cutter groove, and then hold the handle each side of the cutter in order that the cutting blade can be put into the protective sleeve for cable.

3. Move the cable opener through the outer jacket (pay careful attention to where the blade is while pulling) The cable sheath is able to be peeled and opened online without cutting the cable in the middle.

1.Precision Screw mechanism for feeding is protected to prevent jamming and clogging.

2. Tube cutters remain at the same length in areas with restricted access.

3.Swivelled blade deburning tool that is used for removing sharp edges of tubing.

4.Contoured knob is used to hold the spare wheel of a cutter

5.Rollers are cut with grooves to allow cutting near the flared end of tubing

Advanced inner structure, resulting in the fiber is not affected by attenuation.

*Applicable to cables made of loose tube type or ribbon type

* By altering the length of the protruded section of the blades, cables that have diverse diameters can be cut;

Blade revolvers make it simple to alter the blades to the cable sheath

* Cables with a diameter of 10-25mm may be stripped.

Read on 10 Pair 15 Pair 20 Pair 30 Pair STUB Module, Get The Best Price Now

Grade: Industrial

Where Of Origin Zhejiang, China

Mark Name MELONTEL

Model Number: MT-8935

Name of the product: Cable Stripper

Software: Cable Stripping

Color: red/yellow

Thickness: 50mm

Product Dimensions 50x185mm

Handle material: Plastic

The material of blades: Stainless Steel

Packaging: 1 pcs/Blister Card

Body Material CrV/S55C

Weight: 0.12kg

1.Forged and treated with heat to achieve an HRC of 58-62HRC. This allows for cutting with precision.

2. Rubber coated with insulating dual-colors
Handle for a comfort in the grip

3. German VDE certified, passed the high voltage insulated 10,000V test, can withstand 1000V working pressure , and meet IEC60900 standards.
Standard

4. Billhook blade that slides on a guide block to protect to the wires that make up cables

5. Be sure to check the insulation layer prior to using to make sure you are sure that the layer of insulation isn’t damaged, and is dry and clean.

Fixed hook blade

No harm to the core of conductor.

Blade made out of stainless steel

With the imported plastic handle made of TPE

Through PAHS requirements, can be used between -40 + 3 degree and up to 70 deg

1.The head is made of stainless steel with fine workmanship, which can enhance the hardness and corrosion resistance of the head.

2.The head has sliding guide block, which is not easy to damage the inner core. The cutting edge is heat treated, which makes the cutting sharp, high hardness and smooth.

3.The knife head and handle are precisely fitted, and grasp firmly. It is not easy to fall off during use.

4.The cutter head is designed with convex point, so that the cutter sleeve and the cutter head are firmly attached and not easy to fall off, which is convenient for storage.

Learn more about What is A FAST Connector Fiber Optic? The Ultimate Guide

Model Number: MT-8909

Type The optical cable stripper

Where Source: Zhejiang, China

Brand Name Melontel

Use FTTX: FTTH

Network 4G 3G, 5G FTTx, FTTH

Product Name: Round Cable Stripper/Slitter

Color: Gray, blue,black

Single package size: 9X3X4 cm

The single gross weight is 0.035 kg

Product dimension 85mm

Temperature of work range: Between -40 and 70

Fiber optic loose tube fiber demands the use of a precise fiber optic stripping tool that is capable of cutting various buffer tube diameters, without damaging the optical fiber inside.

The stripper comes with adjustable blades which can be set for any thickness to guarantee nick-free access to the jacket into your Fiber optic buffer tubes.You can make use of it to strip simplex fiber as well as a variety of fiber optic cables up in 0-7.9mm diameter.

The Fiber Optic Stripping tool provides a secure and comfortable grip, making the process of stripping fiber optics quick and efficient.

1. The ideal device for lateral resection fiber coaxial cable . It is ideal for stripping 2mm and 3mm cable sheaths for indoor use.

2.The thickness of the blade can be adjusted in order to make sure that the fiber does not get damaged.

3.Straight blades that are in the direction of horizontal are cut longitudinally to create a circle which is cut either horizontally or longitudinally.

4.Small size, lightweight and simple to use.

5.Suitable for twisted pair tight clad cable CB antenna cable, SO/SJ/SJT, and various types of power cable.

Read on: What is the LC Fiber Connector? The Ultimate Guide

Name: Cable Stripper

Material: Handle is made of plastic, Blade is made of metal

Color Black and Silver. Black

Type: horizontal type

Application is suitable for cutting tubes that are composed of hard and soft copper and aluminum

Packaging: 1pcs/Blister Card

GW:281 G

Length: 131 millimeters

Cutting thickness: 1 millimeter .

Certification: ISO9001

This cable cutter horizontal with a sharp blade allows you to effortlessly adjust the thickness of its blade. Its easy rotation will finish the loop cutting of an outer portion of cable. Its outermost layer the cable is able to be cut and detached easily.

Cutting wheel made of steel, that cuts clean and neat

Screwed flexible

Please choose the cutting range to operate the tool.

This product is not insulated Live work is strictly forbidden.

Don’t utilize this product to hit other objects.
Avoid using objects that could strike this product. To stop the thread from getting wound it is advised to wear glasses that protect you from injury.

1.Precision Screw mechanism for feeding is enclosed in order to prevent jamming and clogging.

2. Tube cutter remains at the same length in areas that are restricted.

3.Swivelled blade deburning tool that is used to remove the sharp edge of tubing.

4.Contoured knob houses the spare wheel of a cutter

5.Rollers are cut with grooves to allow cutting just close to the flared end tubing

Read on: Fiber Connector Types，The Ultimate Guide

Model Number: MT-8912

Type The Cable Stripper

Location Of Origin Zhejiang, China

The Brand Name is MELONTEL

Use for: Cable Stripping

Name of the product: Cable Stripper

Applications: Cable Stripping

Color Yellow

Weight: 35g

Product Dimensions 120mm

Handle material: Plastic

Blade material Material for blades: Metal

Packaging: 1 pcs/Blister Card

1. The diameter of wire can be adjusted as necessary

2. Turn the wire clockwise for 3 to 6 circles. One-time stripping and retaining the wire core

3. Modulate the amount of stripping of wire in accordance with the different methods

4. The blades are precisely formed tempering, quenching, and shaping to assure smooth and smooth process

5. A special technique and top quality material guarantee accurate dimensions and long-lasting life. lightweight and durable.

1. It is quick and easy to strip many kinds of cable.

2. With a return spring as well as locking devices.

3. Pen design Compact structure, easy to carry around.

4. The suit is suitable is suitable for RG6 (75-5), RG59 (75-4), RG7, RG11 (75-7).

Remove the coaxial cable from the C Satellite, Home Theater or CCTV installations, CATV Security System Monitor, every kind of high-density professional video equipment including the matrix OSD and optical transceiver Digital Video Recorder, etc.

The button of the stripper to make it open for stripping holes you’ll need to open in the direction indicated on the stripper.

Release the pressed button.Rotate the stripper three times until the able’s insulation is removed.

Click the stripper’s button and then pull the cable out.

Take off the insulation in the interior and jacket.

Read my article on What Is A Fiber Optic ST Connectors? The Ultimate Guide

Location Source: Zhejiang, China

Mark Name MELONTEL

Model Number: MT-8914

Name of the product: Cable Stripper

Software: Cable Stripping

Blade material Material for blades: Metal

Handle material: Plastic

Dimensions: 9.8*3.5*2 cm

Weight: 34g(NG)

Color Gray

Packing: 1 PCS/blister card

This Coaxial Cable Stripping Tool is an expert quality stripping tool with several blades that take off of the coaxial cable jacket and the inner conductor simultaneously. A rotatable key inside the tool, permits choosing the appropriate coaxial cable’s kind and size.

Strip Length: The stripper is able to strip the cable into four lengths, 4 6, 8, and 12mm. The length of stripping is pre-set to 6mm. If you would like to strip different lengths, you can adjust the blade’s location.

Blades Depth: You can make use of the hex wrench that is mounted at the side of the tool , to adjust the depth of the blades. Put the hex wrench in the adjuster for blade depth on the lower part of the stripper, then turn the hex wrench counterclockwise (to cut smaller cables) and counterclockwise (to cut longer cables).

Repeat the above steps to set the second blade.

Stripping Cable

The V-block can be reversed. Utilize a hex wrench to push the V-block from the housing, aligning the character on the block with the arrow, and finally put the V-block in its housing. The arrow that was indicated suggested the RG cable’s size just in between the two blocks. 6 = RG6 (5C2V), 8 = RG58 (3C2V), 9 = RG59/62, D=RG174 (for TL-332D).

The knurled area on the upper jaw to release the jaws of the stripper.

Place the cable you’d like to cut into the V-block, until cable is in the V-shaped guide. Release the jaws of the upper one for closing the jaws.

Put your index finger in the ring of the stripper’s finger then turn the stripper clockwise 3-4 times. The cable’s insulation will be removed when you rotate the stripper.

Unlock the jaws and take off the cable. Remove the dielectric and outer jacket and expose the inside conductor.

1.Stripes on the outer the jackets for coaxial cables suitable for RG-58/6/7/11 cable.

2. With three Blades.

3. Blades that are fully adjustable and replaceable.

4. Simple procedure: secure the tool on the cable, spin it clockwise and then remove the unwanted part.

5. Made from the highest quality material.

6. Does not require batteries or electricity.

7. The ergonomic design makes it easy to use.

Keep on reading:Fiber Optic Drop Cable，Everthing You Need Know

Today, broadband is an essential requirement for all households and is as essential as water, electricity , and gas in the home. You’ve studied the broadband home follow, but what is the best way to connect it with the optical cat in your home? While the home may have some limitations, but they are mostly operated by the installation team of the sales office I think we don’t have to worry with how to link the broadband house to optic cat.

In actuality, the home broadband connects to the home can be done using fiber optic cable made of leather cable, you must strip the cable to create connections with the cold connector. It is after that, it’s inserted into the optical ports of your home optical cat that forms the home broadband hardware link to the home. This article will introduce you to the special equipment-skin cable stripper that will show you how the home skin cable created.

The leather cable of the stripper of drop cable is on the top of the square that is small and inserted until it reaches the ruler for determining the length you need to cut.

In the depths of the 4cm sizer in order to remove the line feel a snapping sound, that is the fibre optic cable’s skin will be removed while cutting the fiber reinforcement. There is a very soft sensation. The stripping effect can be seen The skin of the line is smooth split from the center the core is on opposite sides fine steel wire are flush disconnected from the line skin. The line skin will be removed on the flush is not damaged or damage, the fiber optic core does not harm, no damage. You can also use a ruler to measure core length once more, only 4cm. Following the above guidelines, Drop cable stripper cuts deterministic excellent results, high stripping with no defects the size of the stripping is precise with and without deviation.

Overall this leather cable open dialer an excellent tool to remove the line carbon steel pliers, with a built-in horizontal straight line blade quick and easy to strip the skin of the line but not to harm the core, slicing the entire length of the line is precise with without deviation. Specially designed leather wire fiber optic cable that connects to the home via the network, with special lines designed to help reduce time and effort.

Try for free FTTH (fiber to the home) and FTTH cable